Surface Pro 10 Repair in Eastwood & Macquarie Centre
Cracked screen, dead battery, liquid spill or a logic board that won't power on — our technicians repair the Surface Pro 10 in-store. Bring it to iPhix Repair Centre in Eastwood or Macquarie Centre (North Ryde), Sydney, for a free diagnosis and a clear quote before any work starts; most Surface Pro 10 repairs are done the same day.
See everything we repair for Surface
Surface Pro 10 repairs we do in Sydney
Every Surface Pro 10 repair below is done in-house at our Eastwood and Macquarie Centre stores — nothing is sent away.
Surface Pro 10 Screen Replacement
Cracked glass, dead pixels, lines on the display or no image at all — we replace Surface Pro 10 screens with quality parts and test touch, True Tone and brightness before handing it back. Most phone screens are done while you wait.
Surface Pro 10 Battery Replacement
If your Surface Pro 10 drains fast, shuts down unexpectedly or reports degraded battery health, a new battery brings it back to life. Fitted and tested in-store, usually the same day.
Surface Pro 10 Charging Port Repair
A Surface Pro 10 that only charges at certain angles, charges slowly or not at all often just needs the charging port cleaned or replaced. We diagnose it free and fix the real cause.
Surface Pro 10 Water Damage Treatment
Liquid damage gets worse by the hour. We open your Surface Pro 10, clean the boards with ultrasonic treatment and assess what can be saved. The sooner you bring it in, the better the odds.
Surface Pro 10 Motherboard Repair
No power, boot loops, no service, or faults after a drop — our technicians do board-level microsoldering on Surface Pro 10 motherboards, the kind of repair most shops send away.
Surface Pro 10 Data Recovery
If your Surface Pro 10 is dead but the photos matter, we can often repair the board just enough to get your data back — even from devices other shops declared unrecoverable.
Surface Pro 10 Keyboard Replacement
Keys that stick, repeat or don't register on a Surface Pro 10 — including butterfly keyboards — are replaced with the full top case or keyboard assembly, with the trackpad and battery tested afterwards.
Surface Pro 10 Hinge & Housing Repair
A Surface Pro 10 with a loose, cracking or seized hinge gets worse every time the lid opens. We replace hinges, re-seat display cables and straighten or replace damaged housings before the screen cable fails.
Surface Pro 10 Fan Clean & Thermal Paste
If your Surface Pro 10 runs hot, slows down under load or the fans never stop, years of dust and dried-out thermal paste are usually the cause. We strip the cooling system, clean the fans and heatsinks and re-paste the CPU and GPU.
Surface Pro 10 repair FAQs
How long does a Surface Pro 10 screen repair take at iPhix?
Most Surface Pro 10 screen and battery repairs are finished the same day; logic board and liquid damage repairs usually take 1–3 days because the board is cleaned, inspected under a microscope and tested. Walk into our Eastwood or Macquarie Centre store — no booking needed.
How much does it cost to repair a Surface Pro 10?
Pricing depends on the repair and the parts you choose, so we quote each Surface Pro 10 individually. Diagnosis and quotes are free — call 0406 886 999 (Eastwood) or 0455 561 141 (Macquarie Centre) or drop in and we'll give you a price on the spot, before any work starts.
Can you repair a Surface Pro 10 that has had liquid spilt on it?
Yes. Liquid damage is the most common Surface Pro 10 repair we do. Keep it switched off, do not charge it, and bring it in as soon as you can — we open it, clean the logic board ultrasonically and repair damaged components with microsoldering instead of replacing the whole board.
My Surface Pro 10 won't turn on. Is it worth repairing?
Usually, yes. A Surface Pro 10 that won't power on is most often a logic board, charging circuit or battery fault, all of which we repair in-house at board level. Diagnosis is free, and if the machine can't be saved we can usually still recover your data from the SSD.
Do I need an appointment to repair my Surface Pro 10?
No — walk-ins are welcome at both stores, seven days a week. If you'd like to check part availability for your Surface Pro 10 first, give us a quick call on 0406 886 999 (Eastwood) or 0455 561 141 (Macquarie Centre).
Bring your Surface Pro 10 to either store
Eastwood (Eastwood Arcade, Rowe St) and Macquarie Centre (North Ryde, in front of JB Hi-Fi) — same technicians, same warranty, open seven days.
Macquarie Centre
Shop Kiosk 4406, Macquarie Centre
Corner Herring & Waterloo Rd
North Ryde NSW 2113 · In front of JB Hi-Fi
Monday – Wednesday9:30am – 6:00pm
Thursday9:30am – 8:00pm
Friday – Saturday9:30am – 6:00pm
Sunday10:00am – 6:00pm
Need your Surface Pro 10 fixed?
No appointment needed — free diagnosis and quote at either store.